NCV95 shielding fleece is a carbonized polyester fleece. The NCV95 makes effective protection from low-frequency electric fields possible. Ideal as a grounded mattress pad.
According to Faraday, effective shielding needs to be on 6 sides – 4 walls, the ceiling, and the floor. Most of the time, the walls and ceiling are quickly and effectively protected, the floor with the laid power lines is generally the biggest “construction site”. Depending on the existing load, removing flooring might be necessary, which is either financially damaging or simply not possible in a flat or parquet floor.
With our meshes and fleeces, we now have a solution to this problem. This NCV95 shielding fleece is ideal for large surfaces as well as for local use as an earth carrier in bed. An additional thin floor (ex: click laminate) can be laid on top of the existing flooring.
The NCV95 is also ideal as a groundable mattress pad between the slat frame and the mattress to protect from low-frequency electric fields and to ground it before a person can go to sleep on it. If the fleece is laid on an even larger surface, the whole bed can be put on the grounded shielding fleece.
The screening attenuation is a sensational 80 dB which is equal to 99.99% protection against LF.
NCV95 shielding fleece technical information
- Screening attenuation: up to 80 dB (99.99 %)
- Quantity / Length: Yard goods, 20-meter rolls
Orders in cuts of 1.0 running meter. If it is cut to the client’s specifications, returns and revocations are not possible. Free test sample possible.
- Width: 95 cm
- Length: Yard goods / 20-meter rolls
- Screening attenuation: 80 dB (99.99%)
- Grammage: 90 g/m²
- Thickness: 0.55 mm
- Tear resistance: 260 N/mm lengthwise, 35 N/mm laterally
- Materials: Polyester, carbon layer
Earth: Electrically conductive. Can be contacted and grounded to shield against alternating fields (LF)! You can find the corresponding components under “Grounding”. It is difficult to recommend anything because it depends on the usage. Please ask us!
Application: Floors, indoor walls, ceilings
Field type: LF (low-frequency alternating fields)
Processing the NCV95 shielding fleece
If the fleece is being used as an intermediate layer, we recommend sticking it onto the surface with the DKL90 dispersion glue. The wall and back of NCV95 need to be coated with a paint roller with DKL90. Stick the wet surfaces together, set them by hand (with disposable gloves) and press together with a rubber pressure roller without causing creasing. Work quickly and strip by strip so that the DKL90 dispersion glue does not dry.
You can only apply the fleece crease-free on smooth surfaces! Structured surfaces (wood-chip wallpaper, structural plaster, roller structure of paints) must be smoothed. If this is not possible, we recommend using the NSF34 shielding paint. If using it as a “grounded mattress pad”, the strip has to be grounded with a GD grounding plug or GP grounding plug. In this case, the earth checker should not be forgotten in order to be sure that the earth also works.
Order quantity, revocation of the order and small quantity surcharge
If the fleece has been cut in pieces of 1.0 running meter as requested by the customer, it is not possible to cancel or revoke the order. For this reason, it is possible to request a free sample of the shielding fleece. By ordering pre-finished products, waiving the statutory right to return goods is accepted.
Daily business has shown that small quantities can not be financed by the continuously rising costs of packaging and shipping. Therefore, we are forced to introduce a minimum quantity surcharge for small quantities of up to 3 meters with this product. We ask for your understanding.