Full spectrum daylight LED 3step. Flicker-free, natural light modelled on the sun with CRI 95, colour temperature 5200 Kelvin. Dimming without dimmer in three brightness levels: 100 Watt, 50 Watt and 15 Watt. E27 socket.
This LED convinces not only with the produced building biologically healthy and natural light but also with the unique function of dimming. But not in dependence with a dimmable light switch, i.e. dimmer switch. This LED lamp is even more ingenious, because a dimmer switch is no longer needed. Alone when you think of how often it was already necessary to replace the defective inner part of a flush-mounted dimmer switch due to wear and tear …
It is self-explanatory that this full spectrum daylight LED can effectively replace any energy saving lamp and standard LED of this 100 Watt power class in terms of light quality and performance. The full spectrum daylight produced here is flicker-free and of course this LED is 100% mercury-free!
Full spectrum daylight LED 3step: Ingenious lighting technology in 3 brightness levels, modelled on the sun
To dim natural light without dimmer is the strength of this LED full spectrum daylight lamp. The dimmer is simply replaced by pressing the light switch again. Simply press the light switch within one second and the LED changes to the next of the three available brightness levels:
- Switching mode 1: Maximum brightness with 100% at 12 watts (comparable to a 100 watt bulb)
- Switching mode 2: 50% brightness at 6 watts (comparable to a 50 watt light bulb)
- Switching mode 3: 15% brightness at 2 watts (comparable to a 15 watt bulb)
The LED always starts in switching mode 1. when the light switch is pressed again – change to switching mode 2. the same thing is repeated – change to switching mode 3. the maximum time span between switching off and switching on again is one second. Confirming the light switch 5 times in a row (ON – OFF – ON – OFF – ON) changes, for example, directly to switching mode 3 with 15 watts. When switched off after 10 seconds, the LED jumps back to switching mode 1 with maximum brightness.
Bright, natural light thanks to state-of-the-art technology in this LED 3step!
This high-tech LED with a maximum of 12 watts impresses not only with its light intensity and ingenious dimmer switch, but also with its very high colour rendering. The colour rendering index CRI is an unbelievable 95 i.e. with this full spectrum LED lamp you can enjoy maximum full spectrum light close to the sun. In terms of colours this means: seeing colours naturally, recognising colours naturally and comparing colours naturally, but also being less tired and able to concentrate better.
Other useful factors are: low heat generation and a beautiful fresh, clear light for maximum natural lighting in the home and at work.
Full spectrum daylight LED: Convincing performance at a glance
Sunlight does not flicker, i.e. it does not flicker at 0 Hz (Hertz). Developed according to the model of our sun, this LED is also maximally flicker-reduced, i.e. healthy flicker-free even according to building biology guidelines. This LED produces up to 1000 lumens of luminous flux at a brightness of 100 watts.
- Colour temperature: 5200 Kelvin
- 95 CRI Colour rendering index
- max. 1000 lumens (depending on switching mode)
- dimmable, in 3 steps
- Consumption: 12 watt (depending on switching mode)
- Lifetime: 35,000 hours
- suitable for continuous operation
- 3 years warranty
Recommendation: Read a book under the light of such a full spectrum daylight LED. We can hardly describe the difference in the contrast of the typeface and basically this pleasant reading – only experiencing it yourself helps!
FULL SPECTRUM LAMPS – THE HEALTHIER LIGHT
Our near-sun full spectrum daylight lamps support your natural vision and health in many ways. This is because their spectrum is very similar to sunlight. They therefore achieve similar supporting effects as the sun. The most important advantages for you are:
- More well-being
- High contrast viewing of small fonts
- See and distinguish natural colours
- Fewer eye problems
- Less tired
- Concentrate longer
- More capacity
FOR THEIR ILLUMINATED EVERYDAY LIFE THIS MEANS:
More relaxed eyes
Examples of use
As an LED lamp (without mercury) with E27 socket, it can be used wherever you have previously used incandescent lamps, energy-saving lamps or normal LEDs. For example for lighting in the kitchen, at the dining table, in the living room, in the children’s room, in the hallway, in the bathroom, at the desk or in the reading corner. Basically everywhere where bright fresh light is desired and natural lighting is simply ideal.
The installation of the LED lamp is identical to changing a light bulb. Simply screw it in and that’s it. This LED fits everywhere where an E27 light bulb was used before.
The brightness of this full-spectral LED lamp belongs to the 60 W incandescent lamp power class, but shines brighter.
Supplementary information and notes
This LED full spectrum daylight lamp, with a consumption of 12 watts, has already paid for itself within 1,400 hours despite the higher acquisition costs due to the low energy consumption compared to a 100 watt bulb!
ATTENTION: This full spectrum LED lamp must NOT be operated with a dimmer!