SHIELDING
WATER
LIGHT
Repeater RP-NA16-KA | level 2 repeater for the fuse box | master switch set-up | building biology save wireless technology according to EnOcean standard
€ 117,80 (€ 98,99 excl. VAT)
The fuse box repeater RP-NA16-KA is an extension for the mains isolator NA 16-1P radio and is installed in the fuse box.
As a level 2 repeater, this increases the range of the demand switch. Or to significantly improve a possibly impaired reception.
Master switch series
Function based on a radio signal encoded according to the EnOcean standard that is harmless to building biology and is only transmitted when the transmitter in the remote control is actuated.
Delivery time: approx. 1-3 business days | Antenna ANT-NA16 required for operation!
In stock
MASTER SWITCH SERIES
The RP-NA16-KA from BIOLOGA acts as a level 2 repeater in the fuse box to increase the range of the mains isolation switch NA 16-1P radio. Or to significantly improve a possibly impaired reception.
There are various causes that affect the quality of the radio signal between transmitter and receiver. Probably the most common challenge is the excessive distance between the remote control and the demand switch of the master switch system. However, materials such as the fuse box, especially in the case of a shielded fuse box, can also become a barrier, as a result of which the switching signal does not reach the demand switch.
This is where the RP-NA16-KA repeater comes in and solves this reception problem very effectively. The range of the demand switch’s receiver module is significantly extended by this repeater and the additionally required external antenna. The repeater has the same dimensions as the demand switch NA 16-1P radio and is installed in the fuse box next to it. The antenna cable is screwed onto the module and the antenna itself is led out of the fuse box.
The repeater works on the basis of a radio signal coded according to the EnOcean standard, which is only transmitted when the transmitter in the remote control is activated. Furthermore, the repeater does not have to be taught-in or configured. It forwards the signals automatically after connection to the operating voltage.
Meaning of the levels explained
A maximum of two repeaters can be used as extensions for the operation of the mains disconnection switch NA 16-1P radio. The level indicates the performance class in relation to the telegrams (data packets).
- LEVEL 1: Receives only telegrams from transmitters (TX-NA16-HAND, TX-NA16-WAND remote control).
- LEVEL 2: Receives, in addition to the telegrams specified in level 1, also those of a level 1 repeater.
Two methods for installing the RP-NA16-KA
Installation with a repeater
- At the beginning: Mains isolator NA 16-1P radio in the control cabinet
- At the end: Level 1 or Level 2 repeater (RP-NA16-UP, RP-16-AP or RP-NA16-KA) plus transmitter (remote control)
Installation with two repeaters
- Start: Mains isolator NA 16-1P radio in the control cabinet
- Middle as bridge: Level 2 repeater (RP-NA16-UP, RP-16-AP or RP-NA16-KA)
- At the end: Level 1 repeater (RP-NA16-UP) plus transmitter (remote control)
We strongly recommend downloading and studying the “Range Overview” guide.
Convincing performance of the RP-NA16-KA fuse box repeater at a glance
Convincing performance of the RP-NA16-KA fuse box repeater at a glance- Level 2 control cabinet repeater for extending the field disconnector of the NA 16-1P radio series
- for extending the range with protection class 1 distributors and shielded electrical installation or disturbed reception
- Building-biological radio technology according to EnOcean standard
- Very robust
- 1 year warranty
Documentation for the RP-NA16-KA fuse box repeater (german / .pdf)
Technical data Range overviewMASTER SWITCH SERIES
Overview of the range and parts of our master switch series
HOT
€ 355,81 (€ 299,00 excl. VAT)
€ 52,40 (€ 44,03 excl. VAT)
€ 46,40 (€ 38,99 excl. VAT)
| Weight | 0,2 kg |
|---|---|
| Dimensions | 9 × 1,7 × 6 cm |
| Scope of delivery | installation instructions, repeater |
| Colour | |
| Brand | |
| Country of origin | Germany |
| TECHNICAL DETAILS | Mains-free switch RP-NA16-KA |
| Colour | Light grey |
| Weight | 50 gram |
| Width | 90 mm |
| Height | 17 mm |
| Range | > 30 metres |
| Operating temperature | -20 – 50°C |
| Radio technology | EnOcean 868 MHz |
| Power supply | 230 VAC / Standby: 0.8 WattThe watt (W) is the unit of power that it used to determine output. More |
| Function | Level 2 |
| Mounting mounting rail/top-hat rail | according to DIN 55022 in the electrical distribution board |
| Scope of delivery | 1. repeater RP-NA16-KA 2. assembly instructions |
| Warranty | The warranty for this product when handled properly is the usual 2 years (§434 BGB + §446 BGB) |
Add a review
Repeater RP-NA16-KA | level 2 repeater for the fuse box | master switch set-up | building biology save wireless technology according to EnOcean standard
Your review
* Review is required
Name
* Name is required
Email
* Email is required
Add photos or video to your review
You may also like…
HOT
Radiation protection
Socket strip, 4-way, shielded LF | with on/off switch | type EF
(7)
€ 67,50 (€ 56,72 excl. VAT)
Demand switch
Demand switch NA 16-2P Standard from Biologa | two-pole disconnection | including LED control lamp
€ 296,31 (€ 249,00 excl. VAT)
Out of stock
Measuring equipment
(3)
€ 199,00
This product has multiple variants. The options may be chosen on the product page
Out of stock
Measuring equipment
(6)
€ 249,00 (€ 209,24 excl. VAT)
Related products
Sale!
SET
(4)
From: Original price was: € 401,60.€ 394,60Current price is: € 394,60. (€ 331,59 excl. VAT)
RENT
from: € 1.257,00
This product has multiple variants. The options may be chosen on the product page
HOT
(3)
€ 26,90 (€ 22,61 excl. VAT)
(8)
€ 99,90 (€ 83,95 excl. VAT)
Reviews
There are no reviews yet