Shielding paint HSF64 | RF screening attenuation against electrosmog up to 93 dB at 40 GHz | without preservative » ideal for allergy sufferers | TÜV SÜD certified | effective at 5G!

from:  49,08

The shielding paint HSF64 is a silicate emulsion paint without preservatives and is therefore ideal for allergy sufferers. The minimalistic formulation has slight limitations in film hardness, adhesion and shielding. HSF64 was revised, modernized and optimized in 2019 after several years for even more efficient shielding effectiveness, with a focus on 5G. Suitable for indoor use only!

Ideally suited for shielding radio radiation from mobile radio, DECT, WIFI and mobile Internet. Groundable for shielding alternating electric fields from domestic power.

RF shielding performance at 1 GHz

  • single layer: up to 43 dB
  • double layer: up to 50 dB
  • triple layer: up to 54 dB

5G frequencies and up to 40 GHz significantly higher, up to 93 dB shielding effectiveness.

PROnatur24® SHOP
Independently verified
4.64 store rating (42 reviews) | 4.71 product rating

HSF64 is our shielding paint which does not contain any preservatives. Suitable for indoor use only! Now up to 93 dB shielding effectiveness at 40 GHz (up to over 99,9999999% shielding effect). TÜV SÜD certified!

The HSF64 shielding paint from YSHIELD focuses on people with an allergy to preservatives. This shielding paint was developed according to a minimalist formula based on potassium water glass. This results in slight limitations in film hardness, adhesion and shielding compared to alternative HF shielding inks HSF54, MAX54 or PRO54.

HSF64 was revised, modernized and optimized in 2019 after several years for even more efficient shielding effectiveness compared to the previous formulation of HSF64. Today, the focus is logically on 5G, even if this was not decisive for this further development of HSF64, the previous formulation was already perfectly suited for this purpose. This new formulation of HSF64 makes it possible to combine the previous shielding paints HSF64 and HSF74 without having to sacrifice a valuable property.

Due to the minimalistic formulation the shielding performance per coat is lower. This represents a weakening in direct comparison with alternative shielding paints. For this reason the triple coating of HSF64 shielding paint is explicitly recommended, the double coating is considered the minimum and a must.

HSF64 is now also a frost-resistant shielding paint and can therefore be shipped all year round for the first time. HSF64 is therefore also suitable for parcel shipment in winter as well as on pallets for trucks, trains and ships. Furthermore, HSF64 is highly breathable, solvent-free, plasticizer-free, low-emission and preservative-free. I.e. outstanding physical and chemical properties combined with very high ecology. This performance is confirmed by the TÜV SÜD certification.

Shielding paint HSF64 | RF screening attenuation against electrosmog up to 93 dB at 40 GHz | without preservative » ideal for allergy sufferers | TÜV SÜD certified | effective at 5G!

Shielding Paint HSF64 | Characteristics

The shielding paint HSF64 from YSHIELD is ideally suited for the very effective shielding of exposure to electrosmog from radio radiation and alternating electric fields. Radio pollution from mobile phones, mobile Internet, WIFI, DECT, GSM, LTE, 5G, etc. is shielded up to 93 dB, which corresponds to an effectiveness of 99.9999999%. Electrical fields from domestic electricity (alternating current) are grounded extremely effectively and can be completely shielded up to 100%.

We generally recommend painting in two, but it is better to paint in three layers. The HSF64 shielding paint must be grounded!

  • Effective RF shielding. Screening attenuation: Single layer HSF64 shields up to 43 dB, two layers up to 50 dB and three layers up to 54 dB at 1GHz. At higher frequencies up to 40 GHz incl. 5G, the shielding is significantly higher again, up to 93 dB.
  • Substrate: Good adhesion on absorbent, untreated, preferably mineral substrates such as chalk, silicate, clay, cement, etc.. Not usable on gypsum-based substrates (plasterboard, …)! After checking on a test surface, you can use small amounts of paint on absorbent dispersion paints, wallpapers, etc.
  • Final coating: Preferably covered with plastic-bonded dispersion paints or silicate emulsion paints. We recommend restricted use of pure mineral paints (clay, chalk, pure silicate). You can find concrete recommendations on the technical data sheet.
  • Grounding: Must be grounded! We recommend the self-adhesive grounding tape for indoor use.
Shielding paint HSF64 | RF screening attenuation against electrosmog up to 93 dB at 40 GHz | without preservative » ideal for allergy sufferers | TÜV SÜD certified | effective at 5G!
Wireless Networks Smartcity

Shielding Paint HSF64 | Yield

Generally speaking, the yield of a shielding paint is necessary depending on the surface. The more the surface “sucks”, ie. absorbing paint, the more shielding paint is required. We recommend conducting small tests to see how quickly the paint “enters”. We highly recommend using our primer because that will prevent an excessively-high usage of HSF64 shielding paint. The “average” yield is based on a “non-sucking” surface.

You need to mix the HSF64 shielding paint extensively before applying it. The heavier ingredients will have sunk from storage and transport, and this must be corrected. With the stirrer that we have developed ourselves it is possible to effortlessly and effectively re-mix and re-apply the HSF64 shielding paint. Simply insert it into a standard electric drill and mix for around 5 minutes per container. There should be no more solid remains of the solid ingredients at the bottom of the container – these would make the shielding less effective because they wouldn’t be put on the wall, but they’d remain in the paint bucket.

Technical shielding effectiveness values from the EMF laboratory

  • At a yield of 4 sqm/liter:
    At 1 GHz: Single layer 43 dB | Double layer 50 dB | Three layer 54 dB
    At 40 GHz:
    Single layer 53 dB | Double layer 75 dB | Three layer 93 dB
  • At a yield of 8 sqm/liter:
    At 1 GHz: Single layer 36 dB | Double layer 43 dB | Three layer 48 dB
    At 40 GHz:
    Single layer 39 dB | Double layer 53 dB | Three layer 66 dB
Stirrer for shielding paints GK5 primer

Shielding accessories

 7,08 ( 7,08 excl. VAT)

Shielding accessories

from:  16,58
This product has multiple variants. The options may be chosen on the product page

Mandatory grounding of the HSF64 shielding paint

All electrically conductive surfaces must be grounded by a qualified electrician in accordance to the DIN/VDE regulations. This can be done over the electrical system’s grounding support (ground contact in the socket) or on the grounded heating pipe of the wall heaters (radiator). A protective circuit also needs to be installed in the fuse box. It must be noted that the circuit must be turned off before painting – a 230-volt, 16-amp shock can be deadly! The electrified flush-mounted box must be a centimeter away when painting the wall.

Electrical alternating fields can be grounded, contrary to mobile radiations (high-frequency) which are based on reflection and cannot be grounded as a result. A protection against mobile radiation is also based on reflection whereby the electromagnetic radiation is prevented from entering the room.

The shielding paint HSF64 protects against both electrosmog immissions. I.e. from alternating electric fields by means of earthing and high-frequency electromagnetic fields by means of reflection.

Self-adhesive conductive grounding tape for shielding paint Conductive carbon fibers as an invisible alternative to the ground tape
Information on functional equipotential bonding in building biology practice

PLEASE NOTE:
SAVE BARE MONEY BY PRIMING!

A pre-treated substrate saves money because less shielding paint is needed. Depending on the surface, up to 20% of the expensive shielding paint can be saved.

For untreated fine plaster and coarse plaster, we EXPRESSLY recommend pre-treatment with our GK5 primer before applying the shielding paint. For already painted surfaces using eg.

Disperse paint can be dispensed with, since relatively little reduction effect can be achieved.

HOT

Shielding accessories

 16,58 ( 16,58 excl. VAT)

Shielding Paint HSF64 | Technical Details

  • Screening attenuation
    Single-layer at 1 GHz shields HSF64 up to 43 dB, two-layer up to 50 dB and three-layer up to 54 dB. At higher frequencies WIFI, LTE, 5G and up to 40 GHz even higher up to 93 dB three-layered. All values provided apply for 1 GHz. The measurement of the attenuation of electromagnetic waves from 600 MHz to 40 GHz has been performed in close accordance with standards IEEE Std 299™-2006 or ASTM D4935-10.
  • Underground
    Interior: Good adhesion on absorbent, untreated, preferably mineral undergrounds like chalk, silicate, clay, etc.. Restricted use on absorbent emulsion paints, wallpapers, etc., please check first! Not usable on gypsum based substrates!
  • Application
    Ceilings, floors, and indoor walls
  • Top coating
    Preferably covered with plastic bonded, water-based emulsion paints or dispersion silicate paints. We restricted recommend pure mineral paints (clay, loam, chalk, silicate). Please find appropriate product recommendations in the technical data sheet.
  • Grounding
    Must be grounded! We recommend our self-adhesive grounding strap.
  • Reaction to fire
    This product is a flame-retardant according to DIN 4102-1 (B1), see below under “Fire reaction report DIN 4102-1”.
  • Ingredients
    Water, potassium silicate, natural graphite, carbon black, pure acrylics dispersion, additives, NO preservation agent.
Properties and application of shielding materials
Weight N/A
Dimensions N/A
Filling quantity

,

Field type

HF (high-frequency electromagnetic field), LF (low-frequency electric alternating field)

Colour

Brand

Country of origin

Germany

Shielding paint HSF64 | RF screening attenuation against electrosmog up to 93 dB at 40 GHz | without preservative » ideal for allergy sufferers | TÜV SÜD certified | effective at 5G!

1 review for Shielding paint HSF64 | RF screening attenuation against electrosmog up to 93 dB at 40 GHz | without preservative » ideal for allergy sufferers | TÜV SÜD certified | effective at 5G!

0.0
Based on 1 review
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
1-1 of 1 review
  1. Avatar of Anonym

    Gefällt mir sehr

    (0) (0)
Add a review
Shielding paint HSF64 | RF screening attenuation against electrosmog up to 93 dB at 40 GHz | without preservative » ideal for allergy sufferers | TÜV SÜD certified | effective at 5G! Shielding paint HSF64 | RF screening attenuation against electrosmog up to 93 dB at 40 GHz | without preservative » ideal for allergy sufferers | TÜV SÜD certified | effective at 5G!
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review

You may also like…

HOT
Close Popup

We use cookies to give you the best online experience. By agreeing, you accept the use of cookies in accordance with our cookie policy. Further surfing in the web shop automatically leads to approval.

Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

GDPR
To enable the GDPR service on this website, we use the following technically necessary cookies:
  • wordpress_gdpr_allowed_services
  • wordpress_gdpr_cookies_declined
  • wordpress_gdpr_first_time
  • wordpress_gdpr_first_time_url

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec
  • tk_lr
  • tk_or
  • tk_r3d

Onlineshop
To use this online shop, i.e. for shopping cart and order processing, we use the following technically necessary cookies and services:
  • woocommerce_cart_hash
  • woocommerce_items_in_cart

Decline all Services
Save
Accept all Services