CANOPY ELECTROSMOG PRO – ALL INCLUSIVE SET. Box canopy for SINGLE BED up to 120cm x 220cm size. Up to 50dB shielding effectiveness (99,999% reduction). Effective against 5G!
With this box canopy, our CANOPY ELECTROSMOG PRO FOR SINGLE BED, you invest in a personal all-round protection against electrosmog. The focus of the canopy Electrosmog PRO is the effective anti-EMF help for people in rented apartments (no dismantling necessary when moving out and the investment remains the same). The set contains everything you need to protect yourself effectively against low-frequency electric fields (domestic electricity) and high-frequency electromagnetic fields (radio) using highly developed technology – including 5G!
Generous room feeling for single beds up to a maximum width of 120cm and depth of 220cm. Canopy dimensions (+/- 5 % tolerance): width 120cm, depth 220cm, height 220cm. Entrance: Two overlapping openings on opposite sides. Assembly: Suspension at four points on the ceiling. To stabilize the box shape, rods (not included) can be inserted into the top sewn-in tabs.
Baldachin against electrosmog and midges – a great solution for flats and holidays
We have searched a long time for a canopy that meets our lofty requirements and we have now packed the canopy into a comfortable set so that there is everything needed to protect yourself against electrosmog caused by:
- Cell phones, smartphones, cordless telephones (DECT, GSM, EDGE, UMTS, LTE…)
- mobile Internet (3G, 4G (LTE), 5G, …)
- WIFI (from neighbour), Bluetooth
- Powerline PLC / DLAN (=Internet via the socket) Loads in the power supply system (without PLC load on the grounding cable)
- Please note: Powerline PLC loads on the ground cable can only be effectively attenuated with the optionally available PLC filter
- electric fields from the power supply (alternating current, 230 V, 16 A)
- electric fields from the photovoltaic system (direct current)
- electric fields from high-voltage lines and railway lines, but not their magnetic fields
If you need to deal with stress caused by magnetic fields, please use our hotline for a personal consultation!
Canopy Electrosmog PRO Elektrosmog Pro box-shape from inside (360° panoramic/sphere image to control)
EVERYTHING IS INCLUDED WITH THE ELECTROSMOG PRO CANOPY FOR SINGLE BEDS
Because this canopy set contains everything that is needed, each individual part needs to be explained in detail:
Canopy for single beds
The canopy surrounds and protects you from 5 directions – the 4 sides and the ceiling. On the top four corners, there are loops that the canopy is hung to. Each corner is connected to the next with a “fabric tunnel” in which a wooden bar can be inserted. This stabilizes it and is available in all DIY stores. These bars are not included in this set. The set contains the necessary mounting equipment to fix it to the ceiling. Drilling the ceiling may be required – have an appropriate drill ready (if needed).Details on the canopy
Shielding flooring underlay
The flooring underlay is made of different material layers. Additional silver threads are interwoven on the underside, which is what makes the flooring underlay electrically conductive and gives it a protective effect. The flooring underlay is laid out on the floor and then the bed is put on the underlay. The feet of the bed can no longer touch the ground underneath.Details on the shielding flooring underlay
The set contains two grounding plates. One is attached to the canopy and the other is attached to the shielding flooring underlay. The conductive material can be contacted thanks to these plates and can be connected to the socket’s earth. You can choose between velcro fastener and magnetic lock.Details on the grounding plates
Grounding cable for the grounding plates
This short cable has a gilded pin on each end. The cable connects the grounding plate on the canopy to the grounding plate on the shielding flooring underlay. Because both grounding plates are right next to each other most of the time, the short, 20-centimeter-long cable is usually enough.Details on the grounding cable for the plates
Grounding plugs for specific countries
Depending on the location of usage, another type of plug might be needed. Choose the right plug for the country it is mainly used in. The optional world plug set expands this individual plug into a connection option in the whole world. However, the world plug set is not designed for permanent use, therefore the individual grounding plug is absolutely necessary.Details on the grounding plug
OPTIONAL: Quick verification of the earth contact on the socket
With this socket checker, checking the socket’s earth will be a matter of plugging in. You will find out in just seconds whether or not your canopy or sleeping bag can effectively connect to the earth. We know from practice that there are many reasons that an earth cannot be connected – from the cable breaking to the electrician simply forgetting during construction. If the earth cannot be connected, the canopy can fail to protect people sleeping in it from electric alternating fields from the power supply despite the preparation.Details on the earth-checking plug
OPTIONAL: Earthing rod for a reliable earth
It is as tragic as it sounds. It is possible that the earth is not connected to the socket or that such a socket is not even provided in that country. Or, the installed grounding cable is damaged and no one has noticed. Whatever the reason may be, you will solve the problem with this earthing rod. Just put it in the ground, outside of the flat, house, caravan, or tent and connect it to the sleeping back – that’s it.Details on the earthing rod
OPTIONAL: Worldwide use of the Electrosmog PRO canopy with our World Plug Set
For the first time, it is possible to use our Electrosmog PRO canopy worldwide with our World Plug Set: whether you live abroad or, in other words, outside of Austria or Germany, are out and about on holiday, or in hotels for work or private use. Using this set could not be easier – just connect the canopy or shielding flooring underlay and a long-enough grounding cable to this plug’s connection sockets. Ready!Details on the World Plug Set
Documentation of the canopy Electrosmog PRO and shielding fabric SILVER TULLE (.pdf)Technical details canopy Technical details shielding fabric Laboratory report screening attenuation
Borrow for familiarity / Cancelling orders
Every canopy is a unique piece. The canopy is produced on behalf of the customer, so there is also a waiting time due to waiting lists and production to Auslierung. This results in the possibility of producing special sizes (longer, wider, higher). Since every single canopy is a commissioned production, there is no possibility to cancel the order. Nevertheless, it is our concern that the customer only buys a canopy if he wants to keep it. For this reason, we offer the possibility of a loan of the canopy for testing and getting to know by a flat rate of € 298 for up to 14 days. This possibility of borrowing allows the customer to personally convince himself of the effect of the canopy without risk. If a purchased canopy is nevertheless returned contrary to these conditions of revocation, then we are forced to offer this reduced price as a “used canopy” in the shop, ie. the repayment amount will be reduced by at least € 300 to cover loss of value, cleaning costs and processing costs (any damage to the canopy will increase the price reduction).
Silver products change color as time goes by and very often have stains from the factory, which is neither a lack of quality nor grounds for complaint. Especially if the used silver does not have a protective coating and has been in contact with air, causing oxidation. If stains or discolorations are unacceptable, we recommend choosing the Electrosmog WIFI canopy. Please note that silver products have a limited durability, their lifespan depends on how often they are moved. Please take care when washing the canopy. Neither the canopy nor the fabric contains nano-silver!